Modell:
Rotating Head Stripper RubberThe cuffs are designed for an anti-blowout device located at the wellhead to seal the annular space between the pump and compressor pipes. This type of cuffs has several variations and sizes:
PGSR-200 - 2-3/8"
OD
PGSR-250 - 2-7/8"
OD
PGSR-350 - 3-1/2"
OD
PGSR-450 - 4-1/2" OD
If you have any clarifying questions, you can:
* write us an email: sales@borgpumps.com with a request for the products you are interested
in• call us by phone: +4917684865334.
Bewertungen: 0
Für dieses Produkt gibt es noch keine Bewertungen
Questions: 0
No questions about this product.
Ähnliche Produkte
Guiberson Type JU & JUS Stripper Rubber Cuffs
Guiberson-Type-JU
The cuffs are designed for an anti-blowout device located at the wellhead to seal the annular space between the pump and compresso..
Stripper Rubber (Short Hall) Type Cuffs
Stripper Rubber (Short Hall) Type
The cuffs are designed for an anti-blowout device located at the wellhead to seal the annular space between the pump and compresso..
Coil Tubing Interlocking Stripper Rubber
Coil Tubing Interlocking Stripper Rubber
The cuffs are designed for an anti-blowout device located at the wellhead to seal the annular space between the pump and compresso..
Oil Seal Cuffs Type " H " Oil Saver
Oil Seal Cuffs Type " H " Oil Saver
Rubber seal for oil seal cleaner types "H916" and "H916B" (otherwise known as: oil seal cuffs)There are two types: standard (black..
Double "E" Rod Stripper Cuffs
Double "E" Rod Stripper Cuffs
This cuff is designed for rods (rods). EEBSR-1/2" - 1"If you have any further questions, you can:* write us an email: sales@borgpu..